EnGenius Technologies 802.11b Manual do Utilizador

IEEE 802.11b Outdoor Wireless Client Bridge User Manual November 03, 2004 Version 1.00 Before operating the unit, please read this manual tho

Version 1.02 162.4.7 Upgrade the Firmware  Setup your TFTP Server The Trivial File Transfer Protocol (TFTP) Server allows you to transfer files ac

Version 1.02 18shown below. Step 2 Press <Esc> keystroke to reboot the Wireless client bridge. Press <x> key during the boot process, and

Version 1.02 202.4.8 Back-up the Wireless client bridge’s Configuration Files After configuring Wireless client bridge, user can back-up the configu

Version 1.02 22Chapter 3. Network Topologies This chapter describes several main types of installations implemented by using the Outdoor Wireless Sys

Version 1.02 243.2 Wireless Client Router-to-Central Wireless Bridge Step 1 Set the COU to perform a bridge (bridge IP address: 192.168.2.1). Step

Version 1.02 263.4 Wireless Client Router-to-Central Wireless Router Step 1 Set the COU to perform a Wireless Router (Wireless Interface IP: 192.16

Version 1.02 28Chapter 4. Network Parameters 4.1 IP Configuration  Wireless Client Bridge Step 1 Enter the IP Address manually into the Bridge IP

Version 1.02 304.2.2 Configure Trap Host Pool The Trap Host Pool has five entries. 1. To modify a entry, click the select button beside the entr

Version 1.02 324.3 Configure Wireless related parameters Step 1 Select “/General Config/Wireless” and the Wireless LAN information page appears as

Version 1.02 34numbers 0 through 9 and the letters A through F. The 40-bit WEP keys can contain any combination of 10 of these characters; the 128-bit

Version 1.02 ii5.1 SYSTEM INFORMATION... 38 5.2 STATISTIC INFORMATION ...

Version 1.02 364.4.2 Administration Step 1 Click Utility, Administration. The following figure shows the Utility – Administration page. 9 Superv

Version 1.02 385.1 System Information By selecting “Running Status/System Info”, enter the System Information page as the figure shown below. In t

Version 1.02 405.3 Site Survey By selecting “Running Status/Site Survey”, enter the Site Survey page as the figure shown below In this page, user

Version 1.02 42Chapter 6. Specifications 6.1 Hardware Specifications  General Radio Data Rate 11, 5.5, 2 and 1 Mbps, Auto Fall-BackClient Interfac

Version 1.02 446.2 Software Specifications Protocol TCP/IP DHCP Client 802.1d Transparent Bridging Security 64-/128-bit WEP encryption MAC address ba

Version 1.02 467.1.2.2 Table of SNMP Trap Community Host Pool Parameter Description Default Value Index 1 Version1 Index 2 Version2 Index 3 --- In

Version 1.02 487.2 Utility 7.2.1 Software Upgrade Parameter Description Default Value TFTP Server IP Address Specify the IP address of the TFTP

Version 1.02 50  Professional Installation Per the recommendation of the FCC, the installation of high gain directional antenna to the system, whic

Version 1.02 21.4 System Requirements Installation of the Outdoor Wireless Client Bridge requires the following: 1. A Windows-based PC/AT compatible

Version 1.02 42.2 Locate the Wireless client bridge and Inline Power Injector Ports  Interface on the Wireless client bridge Unit 9 Ethernet Por

Version 1.02 6 Figure 2.2.1 You can also mount the Wireless client bridge to the mast as shown in Figure 2.2.2. Figure 2.2.2 Version 1.02 7 2.3

Version 1.02 8NOTE: This connection is required for setting up initial configuration information. After configuration is completed, the RS-232 null mo

Version 1.02 102.4.3 Login into the Web Interface The Wireless client bridge supports access to the configuration system through the use of an HTTP

Version 1.02 12 Step 3 Enter “root” in the User Name and the Password fields, and click OK to enter the web configuration user interface screen as sho

Version 1.02 14 IP Use MAC Addr. You can choice Enable or Disable. If you choice Enable , it will set IP = 10.X.X.X that used to last 3 MAC Address